Usb midi to Din Midi connectability ( How to)?

Author
Topic
Barry Smith
Participant
28th October 2020 at 10:26 pm
Post count: 1
28th October 2020 at 10:26 pm #10843

I would like to have the KN7000 as the slave and have my Korg Havian piano as the Master controller. My question is how do I midi these 2 up as the korg has usb ports and the Technics is 5 pin din ports? I would prefer not to use a computer! Any replies would be most helpful! Cheers Barry.

Viewing 2 replies - 1 through 2 (of 2 total)
Author
Replies
  • mriske
    Participant
    30th October 2020 at 10:04 am
    Post count: 19
    30th October 2020 at 10:04 am #10855

    Hi Barry

    This is a good question, and I also want to know  the solution.

    ” quote (translation) connecting a second keyboard or generator is NOT possible.”

    The USB connection is only for computer.

    (info from http://www.meetmusic.com over the Korg Havian  see july/august 2015 magazine)

    Maybe Korg can give an answer.

    Good luck

    mriske

     

  • mriske
    Participant
    31st October 2020 at 6:48 pm
    Post count: 19
    31st October 2020 at 6:48 pm #10857

    Hi Barry

    If you don’t want to use your computer then

    it seems that an USB/MIDI  HOST will do the job.

    Look out !!!!! a HOST and an INTERFACE is not the same.

    success

    mriske

Viewing 2 replies - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.